Talking of sleeping dogs, here's one I probably will let lie, unless anybody knows a simple solution.
Marvell are well known for their SATA controllers, often found on add-in PCIe cards to give extra SATA ports. I bought a Rivo 8-port card so I can add extra drives to my plex box. With Windows 11 pro, which isn't listed as supported, it just works from the start. Two new drives right there where they should be. The only odd thing is this. Disk Manager shows an extra, uninitialised drive. And no, it's not a partition being displayed. In device manager, under Disk drives I have an Unknown Device working "properly" using MS disk.sys as a driver. From cmd, diskpart also shows it as in the attachment.
With USB connected disks, I've seen the USB/SATA bridge displayed as a separate "disk" from time to time depending on the adapter, so I imagine something similar is happening here. I think the uninitialised disk is actually all or part of the SATA/PCIe bridge, which Windows is seeing as "something" connected to SATA, i.e. a disk drive of some sort.
Not really too bothered, apart from that annoying OCD thought that it shouldn't be there.
Hmmm. Pretty sure my old MB (MSI A320M PRO-VH PLUS) doesn't have sata ports designated as external. Doesn't appear to affect functionality. Next time I'm rooting around in the bios I'll see if there's anything in there.
"Biden Vows to Retaliate, and a Super Bowl Rematch"
Well, it appears that the issue is the Rivo's design. It uses a Marvell PCIe SATA controller to provide 2 ports on the card. It has a second chipset, a JMB583 which is a SATA controller/port-multiplier to allow the remaining 6 ports to operate and share bandwidth. I can't find out anything about this chip as it isn't listed on the Jmicron website; their numbering stops at JMB575. Either the website isn't up to date, or this is a chip made for Rivo (and whoever else?). The Rivo driver, for Win10 and lower, seems to control how the two chipsets cooperate and, by default only the 2 Marvell controlled ports are available without it. There's no driver for Win11. Looks as though the phantom drive on my PC is Windows doing a best guess at what that second chipset is, since Device Manager reports the Marvell controller as the parent.
Some Windows 11 users say that all ports are available anyway; others report that the card doesn't work at all. I have a SATA controller in device manager, installed when I plugged the card in and working fine, with two HDDs plugged in. Since I have no need (now) for the other ports, I've disabled the unknown device under Disk drives, and the phantom disk has disapeared from Disk Management and Diskpart.
That'll more than do for me - until I need more drives.
My 'problem' has mysteriously disappeared, perhaps because I mentioned it in polite company ... the drive no longer shows the 'removable' icon in explorer. I suppose I imagined the whole thing.
"Biden Vows to Retaliate, and a Super Bowl Rematch"