USB Memory Stick Recovery

From: ANT_THOMAS18 Mar 2015 22:55
To: graphitone 4 of 77
If the stick is buggered taking an image might fail or take aaaaaaaaaages.

Might be worth unmounting the stick if it gets mounted when plugged in.
From: graphitone18 Mar 2015 23:02
To: ANT_THOMAS 5 of 77
Dah, it's not being recognised by Linux at all - not showing up as a drive under fdisk or df.

 
From: ANT_THOMAS18 Mar 2015 23:07
To: graphitone 6 of 77
Don't worry about that (much). Is it showing up in /dev?

Unplug it, do : ls /dev
Plug it in, do : ls /dev

Is the an extra sdx listing?
EDITED: 18 Mar 2015 23:08 by ANT_THOMAS
From: Manthorp18 Mar 2015 23:09
To: graphitone 7 of 77
Best I've ever come across is iCare Data Recovery, originally referred to me by someone from the possie (was it CHRISSS?).  You can jim recent versions through any high street torrent site.
From: graphitone18 Mar 2015 23:17
To: ANT_THOMAS 8 of 77
Something is..

I've got sda 1 through to 5 without it being plugged in, then an sdb entry with it plugged in. However, when doing:

sudo dd if=/dev/sdb of=/home/dave/image.img

I get an input/output error reading dev/sdb

 
EDITED: 18 Mar 2015 23:20 by GRAPHITONE
From: graphitone18 Mar 2015 23:25
To: Manthorp 9 of 77
Cheers, though had a quick go with the trial and it's not seeing the stick at all.
From: fixrman19 Mar 2015 00:49
To: graphitone 10 of 77
Try Knoppix. Best diagnostic Live version I've ever used.
From: koswix19 Mar 2015 10:31
To: graphitone 11 of 77
Chances are it's the controller chip that's dead, rather than the actual flash.

If you could replace the controller with one from an identical drive it *might* work. You do have a hot-air rework station for SMD soldering, right?
From: graphitone19 Mar 2015 10:38
To: fixrman 12 of 77
I'll look into that if I get no joy today with it, thanks!

I'm trying PhotoRec at work today (I can leave it going on a standalone PC, hopefully it won't take 400 hours).

It's a weird one, it eventually got recognised in device manager last night and I could see it listed under the disk drives (at least the manufacturer's stamp) but when going onto the 'volumes' tab it won't populate the volume information on the disk.

It also installs the SanDisk drivers when put into a PC.
 
From: graphitone19 Mar 2015 10:39
To: koswix 13 of 77
3 of them, powered by rainbows.
From: ANT_THOMAS19 Mar 2015 10:45
To: graphitone 14 of 77
Could be an electrical issue, might be some cracked solder points at the USB plug. Open it up if you can to have a look inside. Heating the connection up or a dab more solder might fix any cracks.
From: graphitone19 Mar 2015 10:46
To: ANT_THOMAS 15 of 77
Good point, I'll find out if it's covered by any guarantee or warranty first.
From: fixrman19 Mar 2015 10:51
To: graphitone 16 of 77
So I happened to see a later post first; I second the electrical/controller problem ideas. Sometimes if the drive is left in they get clipped by hands or other objects depending on where it is used. At work we had one we used for daily register backups that would only work if one held it in whilst holding one's mouth right.  :-/ Stopped using that one.
From: CHYRON (DSMITHHFX)19 Mar 2015 16:49
To: ALL17 of 77
I've got a 4G I put through a machine wash & dry about 5-years ago. Still works great.
From: graphitone19 Mar 2015 17:20
To: CHYRON (DSMITHHFX) 18 of 77
But how's the USB stick?

Ba dum dum tssh...
From: JonCooper19 Mar 2015 21:03
To: ANT_THOMAS 19 of 77
years ago my daughter smashed the connector right off her homework USB stick - I soldered an old bit of ribbon cable between the two broken parts and managed to get the files off before it was officially declared dead.
From: ANT_THOMAS19 Mar 2015 21:45
To: JonCooper 20 of 77
Thankfully they're cheap enough these days to only be worth repairing to recover the data, then it should go in the bin because it can no longer be trusted.
From: graphitone19 Mar 2015 21:46
To: fixrman 21 of 77
I've had a go with Knoppix. Looks like it does what Ant said initially, combined with testdisk/photorec which is what I've been trying already. Had some success though, the wife's found an older USB stick that had most of what was on the encrypted drive, she'd cut and paste the stuff from it to the new one, so I've managed to recover a fair bit. The task's still going and is constantly jumping between 45mins to 2 and half hours to finish, but finger's crossed. :)
EDITED: 19 Mar 2015 22:07 by GRAPHITONE
From: fixrman20 Mar 2015 01:46
To: graphitone 22 of 77
Let's hope. How in the bloody hell did it get encrypted?
From: CHYRON (DSMITHHFX)20 Mar 2015 01:52
To: fixrman 23 of 77
Encrypted + no back up = boner move.