1–1011–2021–29

Cisco Split DNS

From: Ken (SHIELDSIT)30 Jul 2013 08:10
To: Serg (NUKKLEAR) 13 of 29
40586.13 In reply to 40586.12
I sure do!  I didn't get very far with it yesterday because I was lazy, I'll see what I can accomplish today.
Reply
0/0
From: Serg (NUKKLEAR)30 Jul 2013 09:12
To: Ken (SHIELDSIT) 14 of 29
40586.14 In reply to 40586.13
Alrighty, let us know if you need a hand.

Edit: just had a thought about DNS, do you have a DNS server at each site? If not, you'd have to set your main DNS server as the first, which would add a tiny bit of network load and potential delay in name resolution if the VPN goes down.
EDITED: 30 Jul 2013 09:14 by NUKKLEAR
Reply
0/0
From: Ken (SHIELDSIT)30 Jul 2013 09:20
To: Serg (NUKKLEAR) 15 of 29
40586.15 In reply to 40586.14
aye I do, each site has a dc to aid in log ons, do dhcp and dns.
Reply
0/0
From: Ken (SHIELDSIT)18 Sep 2013 17:02
To: Dan (HERMAND) 16 of 29
40586.16 In reply to 40586.2
No idea if I've answered your last question or not.  At our remote locations I have 870's and here at the main office I replaced the 870 with a RV042G.

If I attached my config could someone help me split it?
Reply
0/0
From: Ken (SHIELDSIT)18 Sep 2013 17:04
To: Serg (NUKKLEAR) 17 of 29
40586.17 In reply to 40586.14
I do need a hand. If I post my config dump could you try to help me figure out how to set up the split DNS?
Reply
0/0
From: Serg (NUKKLEAR)19 Sep 2013 10:50
To: Ken (SHIELDSIT) 18 of 29
40586.18 In reply to 40586.17
I'd say don't post it on a public website.. but yeah, happy to help  ;-)
Reply
0/0
From: Ken (SHIELDSIT)19 Sep 2013 11:58
To: Serg (NUKKLEAR) 19 of 29
40586.19 In reply to 40586.18
I could sanitize it, or I can upload it to dropbox and share it with you?  thanks a bunch for the time and help!
Reply
0/0
From: patch19 Sep 2013 12:27
To: Ken (SHIELDSIT) 20 of 29
40586.20 In reply to 40586.19
Sanitise it. Then I can have a look too.
Reply
0/0
From: Ken (SHIELDSIT)19 Sep 2013 12:36
To: patch 21 of 29
40586.21 In reply to 40586.20
Will do!  Thanks!
Reply
0/0
From: Ken (SHIELDSIT)19 Sep 2013 12:48
To: Serg (NUKKLEAR) patch 22 of 29
40586.22 In reply to 40586.20
Ok here it is. I think I removed anything that could be of any interest.

The remote locations are 870's.  This is pretty much the config that's been on them since whoever set them up did it.
Attachments:
Reply
0/0
From: Ken (SHIELDSIT)27 Sep 2013 13:45
To: ALL23 of 29
40586.23
Do any of you know if it's possible to make an Eth port a WAN port?  I can do it with my router at home but it doesn't speak Chinese like this one.  If I can get dual WAN on this router I will take the RV042 out of service, I don't think it's a very good router.  I've attached a pic of the router.  It's an 870. 
Attachments:
Reply
0/0
From: Dan (HERMAND)27 Sep 2013 16:32
To: Ken (SHIELDSIT) 24 of 29
40586.24 In reply to 40586.23
Probably not with something like that. The 4 ports will be a simple Layer 2 switch with no routing capability, meaning they'll all have to be on the same subnet.
Reply
0/0
From: Ken (SHIELDSIT)27 Sep 2013 18:21
To: Dan (HERMAND) 25 of 29
40586.25 In reply to 40586.24
So I wonder how I can do it on my Asus?
Reply
0/0
From: Dan (HERMAND)27 Sep 2013 19:15
To: Ken (SHIELDSIT) 26 of 29
40586.26 In reply to 40586.25
What's the Asus model? I'd guess it's a Layer 3 switch inside meaning it has the capability.
Reply
0/0
From: Ken (SHIELDSIT)27 Sep 2013 19:17
To: Dan (HERMAND) 27 of 29
40586.27 In reply to 40586.26
RT-N66U
Reply
0/0
From: Dan (HERMAND)27 Sep 2013 19:25
To: Ken (SHIELDSIT) 28 of 29
40586.28 In reply to 40586.27
Yeah, looks like that got Dual-WAN capability with a firmware update. 

I did find this for your Cisco:

http://www.gossamer-threads.com/lists/cisco/nsp/107630
Reply
0/0
From: Ken (SHIELDSIT)27 Sep 2013 19:29
To: Dan (HERMAND) 29 of 29
40586.29 In reply to 40586.28
And because I haven't a fucking clue, does that mean it's feasible? That guy wanted failover but I'd want load balancing. I wish you could pay Cisco to configure the thing for you.
Reply
0/0