Reply to All
Show messages
Messages
Inbox
Search
Login
1–10
…
61–70
71–80
81–90
91–100
101–109
3D Printers
From: ANT_THOMAS
14 Jan 2017 19:38
To: CHYRON (DSMITHHFX)
83 of 109
41142.83
In reply to
41142.82
I'd say so. I'm currently using PLA plastic, I think a lot of stuff you buy generally is made out of ABS, which I'm yet to try. Even so, what I've made with the settings I've used has been strong and feels like it'll be durable. Obviously time will tell.
From: koswix
14 Jan 2017 20:40
To: CHYRON (DSMITHHFX)
84 of 109
41142.84
In reply to
41142.82
Depends on the direction. Bonds between layers can be quite weak, but strength within a layer is comparable to an injection moulded part.
From: Manthorp
16 Jan 2017 13:57
To: ANT_THOMAS
85 of 109
41142.85
In reply to
41142.83
Yeah, my experience is nearer Kos's than Ant's, but different machines & I'm a novice. There's a stratification which doesn't matter in a sympathetic plane, but weakens the object (a bit) cross-grain.
EDITED: 16 Jan 2017 13:57 by MANTHORP
From: ANT_THOMAS
16 Jan 2017 15:11
To: Manthorp
86 of 109
41142.86
In reply to
41142.85
I've not done any tests of strength, or made anything that will take a load, but I imagine yours and Kos's experience is right. My stuff "seems" strong, but layer/wall height definitely makes a different to the perception of strength.
From: ANT_THOMAS
22 Jan 2017 21:14
To: ALL
87 of 109
41142.87
It now has a home
From: koswix
23 Jan 2017 00:53
To: ANT_THOMAS
88 of 109
41142.88
In reply to
41142.87
Nice. You should make ikea style instructions and put them on instructables
From: ANT_THOMAS
27 Jan 2017 20:53
To: ALL
89 of 109
41142.89
A unicorn. Horn and tail printed separately.
My first successful print of something with 4 legs requiring a brim and supports. A few failures to get to this point. The banding round the middle isn't great.
After I removed the chin/head support
From: ANT_THOMAS
28 Feb 2017 22:23
To: Manthorp
90 of 109
41142.90
In reply to
41142.85
How's the printing going? Printed anything more interesting than a whistle? But more importantly have you figured out the dual extruder?
From: Manthorp
1 Mar 2017 12:07
To: ANT_THOMAS
91 of 109
41142.91
In reply to
41142.90
Playing happily, Ant, though I've had a spot of trouble with failed prints after using a 'woodfill' filament - it seems to have clogged up my nozzles, J.
I've been making objects that are, nominally at least, vases.
I keep the left extruder for PLA at the moment and the right for ABS, but in time I'm going to have to try dividing a model into zones and printing two-tone in different PLA filaments.
Attachments:
C4KC3LtWcAApFBA.jpg
From: koswix
1 Mar 2017 12:48
To: Manthorp
92 of 109
41142.92
In reply to
41142.91
I've heard woodfilament can really Fuck your nozzle because it's so abrasive.